Treadwall™ - Kilter Route 3 - Pinches (STOCK)

We teamed up with Treadwall™ to create some routes for their famous rotating walls. 

Route 3 - Pinches route

You can make this route medium or hard. 

Puffy yet fingery Stella pinches with knobs on them for thumbs and incut to flat hooded knob feet that you can twist to adjust positivity.

20 Handholds and 20 Footholds

Shaped by Ian Powell and Keith Dickey

Hardware included: Bolts 20 x 1.5" 17 x 2", 3 x 2.5"; Screws 30 x 2", 10 x 2.5"

Attachment tools needed (North America): 5/16" hex wrench or hex bit; screw bit to fit whatever screws you use.

This route includes: KHKD008 (Stella Medium 2 - Puffy Pinches) KHKD011 (Stella Medium 4 - Puffy Pinches) and KHKD009 (Stella XS 2 - Hooded Feet)

If you want an easier version but still pinches email us and we'll pick other sets!

Set screws are not compulsory but are recommended to keep the holds from spinning over time, especially as most Treadwalls™ are only reset occasionally.

Color: The full route will come in 1 color. We have Red 11-12, Orange 14-01, Yellow 15-12, Green 16-16, Blue 13-01, Purple -7-13, Bright Pink 11-26, and Black 18-01. You can make requests in notes and we'll do our best to accommodate them if we have the color you want in stock. If you buy mulitple individual routes we'll try to send each route in a different color. If you buy a pack, like the 4 route pack, each route will come in a different color.

Want special colors or different holds? Email us at holds@kiltergrips.com for customized Treadwall™ packages to suit your needs..

See the walls: Treadwall™