Treadwall™- Starter Pack
We teamed up with Treadwall™ to create some routes for their famous rotating walls.
4 Route Starter Pack!
This pack includes holds to set 4 routes: Jugs, Incuts, Pinches and Crimps - plus feet for each.
Buy all 4 Routes Together at a discount!
You can set a range from easy to hard with this set, meaning you can set your full workout with these routes. At low angles kids and new climbers should be able to climb on all of them, though the pinches and some of the crimps will be challenging.
Route 1 - Jugs! - Puffy comfortable jugs and incut to flat hooded knob feet that you can twist to adjust positivity. Great for warm ups and laps.
Route 2 - Incuts and Mini Jugs - Puffy comfortable incuts and incut to flat hooded knob feet that you can twist to adjust positivity. Great for 2nd warm up and laps.
Route 3 - Pinches - Puffy yet fingery Stella pinches with knobs on them for thumbs and incut to flat hooded knob feet that you can twist to adjust positivity. Can be set medium or hard.
Route 4 - Crimps - Flat and incut triangles accompanied by incut and flat hooded knob feet that you can twist to adjust positivity. Can be set medium or hard.
Set includes 160 Holds - 80 Handholds and 80 Footholds
Shaped by Ian Powell and Keith Dickey
Hardware recommended (not included unless you choose "Yes Hardware"): Bolts 113 x 1.5", 44 x 2", 3 x 2.5"; Screws 150 x 2", 10 x 3"
Attachment tools needed (North America): 5/16" hex wrench or hex bit; screw bit to fit whatever screws you use. If you choose "Yes Hardware" you will get the above hardware plus an impact ready hex bit for the bolts and an impact ready torx bit that fits the included T-20 screws.
This package includes: K050 Winter Medium 4 - Medium Jugs, K057 Winter Medium 7 - Puffy Incuts, K077 Winter Medium 8 - Puffy Incuts, K082 Winter Medium 9 - Puffy Incuts, KHKD008 Stella Medium 2 - Puffy Pinches, KHKD011 Stella Medium 4 - Puffy Pinches, K039 Winter Small 4 - Incut Crimps, K046 Winter Small 5 - Low Angle Crimps, and KHKD009 (Stella XS 2 - Hooded Feet x 4 - one for each route)
Set screws are not compulsory but are recommended to keep the holds from spinning over time, especially as most Treadwalls™ are only reset occasionally.
Colors can be requested and we recommend a different color for each route in the pack.
See the walls: Treadwall™
This set ships free in the continental US