We teamed up with Treadwall™ to create some routes for their famous rotating walls. 

Route 5 - Rounded Incut Crimps

You can make this route medium or hard. 

Puffy incut crimps with a mixed foothold set so you can adjust the difficulty.

20 Handholds and 20 Footholds

Shaped by Ian Powell

Hardware recommended (not included): Bolts 40 x 1.5"; Screws 40 x 2"

Attachment tools needed (North America): 5/16" hex wrench or hex bit; screw bit to fit whatever screws you use.

This route includes: K093 (Winter Small 8 - Crimps) K079 (Winter Small 6 - Puffy Crimps) and K020 (Noah XS 1 - Steep Feet)

If you want another crimp route or slightly harder crimps check out Treadwall™ Route 4. If you want much harder crimps email us at holds@kiltergrips.com for a custom set up!

Set screws are not compulsory but are recommended to keep the holds from spinning over time, especially as most Treadwalls™ are only reset occasionally.

If you choose "Yes Hardware" you will get the above hardware plus an impact ready hex bit for the bolts and an impact ready torx bit that fits the included T-20 screws.

Buy individual routes or get the 5 route pack. Want something different? Email us at holds@kiltergrips.com for customized Treadwall™ packages to suit your needs.

See the walls: Treadwall™