Treadwall™ by Brewer Fitness - Kilter Route 4 - Crimps
We teamed up with Brewer Fitness to create some routes for their Treadwall™.
Route 4 - Crimp route
You can make this route medium or hard.
Flat and incut triangles accompanied by incut and flat hooded knob feet that you can twist to adjust positivity.
20 Handholds and 20 Footholds
Shaped by Ian Powell and Keith Dickey
Hardware recommended (not included): Bolts 40 x 1.5"; Screws 40 x 2"
Attachment tools needed (North America): 5/16" hex wrench or hex bit; screw bit to fit whatever screws you use.
This route includes: K039 (Winter Small 4 - Incut Crimps) K046 (Winter Small 5 - Low Angle Crimps) and KHKD009 (Stella XS 2 - Hooded Feet)
If you want an easier version of crimps/edges email us!
Set screws are not compulsory but are recommended to keep the holds from spinning over time, especially as most Treadwalls™ are only reset occasionally.
If you choose "Yes Hardware" you will get the above hardware plus an impact ready hex bit for the bolts and an impact ready torx bit that fits the included T-20 screws.
Buy individual routes or get the 4 route pack. Want something different? Email us at firstname.lastname@example.org for customized Treadwall™ packages to suit your needs.
See the walls: Treadwall™ by Brewer Fitness